Considering how comparatively inexpensive they’re and how straightforward to put in they’re in a Honda Pilot, it’s exhausting to think about why the engine air filter is likely one of the most neglected upkeep parts in most vehicles. You needn’t get the fancy, costly variety in case you just need to enable clear air to your engine and optimize your fuel efficiency. The proprietor’s manual to your Pilot will display the suggestions and under what type of situations to commonly replace the air filter, and it’s totally quick and easy to do yourself.

Honda Pilot Air Filter Installation Instructions

1. Launch the hood latch of the Honda Pilot with the engine off.
2. Carry up on the hood security latch located under the hood in the middle and elevate the hood. Support the hood by the prop rod located on the fender rail except it has self-supporting hood struts.
3. Find the air box. It’s on the motive force’s aspect of the car to the precise of the battery for those who’re in front of the car going through it.
4. Open the air field top. A few of the older models might have mounted bolts holding down the air field high that can be loosened with an eight millimeter socket, an extension, and a ratchet. A number of the newer Pilots have steel clips that merely unclip to launch and open.
5. Remove the previous air filter.
6. Insert the new filter. It can solely slot in a technique due to the reduce nook on one side.
7. Fasten the air box top and guarantee it is safe and properly fastened.
8. Take away any tools and the previous filter, and shut the hood.